On the Gateway Computer, be sure you have an RSLinx Gateway activation installed. The Title Bar of RSLinx should reflect this. Also, set up any drivers you need for your communication cards. At this point, under “Communications” choose to configure the gateway.īe sure to check “Enable RSLinx Gateway”, then choose “Apply” and “OK”.įinally, restart RSLinx. Since RSLinx sometimes runs as a service, I always reboot the computer if possible. Now that the gateway is set up, you are ready to configure the driver on the client. The client does not need an activation installed to access the gateway. Click “Communication | Configure Drivers”, then choose “Remote Devices via RSLinx Gateway. If your gateway machine is not automatically discovered, enter the IP address of the gateway machine, and hit “Browse”. You will see the drivers that are available on the Gateway PC. Click the driver you wish to connect to, and press OK. RSLinx Classic Gateway O RSLinx Classic Gateway estende as comunicações baseadas em RSLinx Classic a toda a empresa, conectando clientes em redes TCP/IP. RSLINX CLASSIC GATEWAY DRIVERSĪt this point, if you are not able to see any drivers on the gateway machine, be sure to double check the firewall on both PCs. Produtos de programação e configuração, como o RSLogix e o RSNetWorx, usam um RSLinx Classic Lite ou superior local, com dispositivos remotos via driver do Linx Gateway configurado para.

Also be sure the gateway machine is on the same network as your PC.Īfter you press “Apply” and “OK”, go to the RSWho screen of your client. Highlight the driver, and you should see all devices on the Data Highway Plus network.

Rslinx classic gateway download